Cure and seal products are a great way to protect and cure a new slab of concrete. While concrete is known to be strong and durable, nigh indestructible, it does not just appear that way. Instead, it goes through a long and delicate process of mixing and curing that gives it its strength. If you see cracked, crumbling concrete, it is likely that the concrete has actually been poorly mixed and cured. The easiest way to avoid this is to make sure your concrete cures properly.
Concrete is mixed with Portland cement, water, and some sort of aggregate, like gravel or sand. Once mixed, it is poured and spread out, according to the project’s needs. However, after it has been poured, the concrete needs to cure for the proper amount of time. The key to curing is to maintain a consistence level of moisture and temperature, which helps the concrete gain most of its potential strength. Without a proper curing process, the concrete will never be as strong as it could be, and it will manifest problems later in its life.
A cure and seal is a product that provides a membrane over the top of freshly poured concrete. This membrane helps retain the proper amount of moisture while keeping the concrete at an adequate temperature for the curing process to be at its most effective. While the curing process is traditional done with burlap sacks or tarps and a consistent stream of water, cure and seal products are relative newcomers to the stage.
The biggest advantage to cure and seal products is that they provide a layer of protection for your concrete above and beyond what a traditional curing process will give. Typically, once the concrete is cured after the thirty-day period, it is ready to be used, though it is not protected from stains and negative effects of weathering. However, concrete treated with a cure and seal process is cured and sealed, just as the name implies. That means that the concrete actually comes into the world sealed, protected from potential disasters in the early stages of its life. While the seal will have to be renewed some years later, depending on the cure and seal product used, as well as a variety of other factors, the concrete will be able to repel stains and increase its longevity at crucial stages in its existence.
Our Take: Some excellent cure and seal sealers include Aqua-Cure VOC and we like the Lithi-Tek LS 9500 a penetrating densifier and waterproofer that can also be used as a cure and seal.
